Mossy Oak Baby Bedding Set

Mossy Oak Bedding Shared Room

Hardwood Stair Treads and Risers

Alternative Design of Oak Stair Treads to Save Your...

August 25, 2019 Oak

How to Build a Small Oak Nightstand

Oak nightstand – Build your own little night table with some building materials that you can find at your local home improvement store. These simple step-by-step instructions are designed to build a small bedside table that is 14 inches square and 25 inches tall. Adjust the size of wood panels and table legs to build a custom wardrobe to fit your space

Best Oak Nightstand

Best Oak Nightstand

Sand all wood paneling and each table leg with light sandpaper to remove splinters and roughness. Apply a coat of paint or primer on one side of the wooden panels and all of the table legs. Lightly sand all wood surfaces and remove sanding debris with a damp sponge or cloth. Cover your work surface with a clean, soft cloth so you will not scratch your oak nightstand finish as you build it. Place the four table legs on the canvas. Measure and mark 10 inches from the top of each leg. Place one of the “L” brackets on each brand and then put them in the legs with wood screws.

12 Inspiration Gallery from How to Build a Small Oak Nightstand

Image of: White Oak Nightstand
Image of: Unique Oak Nightstand
Image of: Top Oak Nightstand
Image of: Rustic Oak Nightstand
Image of: Rustic Oak Nightstand Design
Image of: Popular Oak Nightstand
Image of: Oak Nightstand Ideas
Image of: Oak Nightstand Design
Image of: Modern Oak Nightstand
Image of: Famous Oak Nightstand
Image of: Classic Oak Nightstand
Image of: Best Oak Nightstand
READ :  Alternative Design of Oak Stair Treads to Save Your Budget

Place one of the finished wood-based panels face down on the covered work surface. Let the one hand hang over the edge of your work table 4-inches. Turn one of your legs up and down so that the lower the “L” bracket fits flush in a corner of your wood paneling. Attach table legs to the wood panel. Repeat this procedure for the other extended corner. Turn the exposed corner of your table and attach the brackets to the four corners. This is the bottom shelf of your little oak nightstand. Place the remaining wood paneling down on the covered surface.

READ :  How to Install Pergo Oak Laminate Flooring

Comments are closed.